End of Summer Sale: Save 20% on Casting Metal until Sept 2nd 2011.

This month of August draws to a close, school term is already starting and 4 long months still loom on the horizon before 2012. So what does one do on cold, wet afternoons and evenings? Well one solution is to break out those moulds you stored away in April and get cracking making new armies, chess sets or dioramas. With a wide range of themes to choose from, you will never be bored.

To help you in this noble venture we have dropped the prices on ALL our metal by an astounding twenty percent (20%) , but only until next Friday (Sept 2nd). The more you buy the cheaper the metal per bar is. Metal bars are now available as low as 2.24 Euro each.*

*based on purchase of 100 bars of Standard Casting metal.

2 New LOTR Mithril Releases in August 2011

MS569 Hirgon, Bearer of the Red Arrow.

MS570 Sam with the cooking apparatus.

Mithril Miniatures has released two more 32mm scale metal miniatures in August 2011. These are pre-primed.

http://www.mithril.ie

The MS570 Figure is the Hobbit Samwise Gamgee. During his adventure with Frodo and Gollum towards Mordor to destroy the One Ring they rested in a glen near a river.

As Frodo rests, exhausted by the drain created by wearing the One Ring, Sam employs Gollum in gathering food (rabbits) and then herbs. Sam then cooked a meal.

MS569 Hirgon, Bearer of the Red Arrow.
Hirgon is an emissary of Gondor, who brought the Red Arrow to Théoden at Harrowdale, in token of Gondor's desperate need for help from its old allies. Its flights were black and its barbs were made of steel, and it took its name from a mark of red painted on the arrow's tip.
Riding back eastward to his Lord, Denethor, Hirgon and his companion encountered Sauron's forces on the Rammas Echor, and were cut down as they tried to escape.

NEW LOTR M-SERIES PROJECT

Mithril has manufactured over 600 miniatures over 20 years and we now are giving our customers the opportunity to decide what we make next.
Go to the forum and register for FREE today.

http://mithrilfigures.proboards.com/index.cgi?#community

Contact info@princeaugust.ie and tell them your username so they can upgrade it to Bronze Level. This is required to take part. This is free too.
The only requirement for membership is that you ordered from Prince August or Mithril sometime in the last 3 years (approximately). If you are new to the company then order something and then join. This project is for customers after all, not random strangers.

We have had numerous enquiries and requests from members about the regular M series and whether we are planning to release further figures in this format.

We realize that there is a significant number of collectors who wish to see more M figures released, and so, after much consultation and discussion we have decided to attempt a rather new and novel experiment with the M series. This new approach not only allows members to choose which M range they would like to see, but also the price will depend on how many orders we receive.

We have carefully considered the pricing structure for the range which will be as follows:
If we sell 100 sets then the price / figure will be €22.50. If we sell 400 sets then the price will be €7.50. We will use a sliding scale of prices to exactly work out the costs of any number of sets between 100 and 400 (thus 120 sets will be a little cheaper than 100 sets). We will also offer a discount on multiples of the same figure which are bought ( €19.95 for 3 figures)

1. Fellowship members and Bronze Level members will decide which range they would like to see produced. We will open a suggestion list for an M range similar to that for the Ms figures, and hold a vote on which suggestion would be most popular. Members can choose anything they wish, as long as it falls within the constraints of the Tolkien licence, and as long as the 10 releases are 10 single figures, or 9 single figures and 1 cavalryman ( or equivalent).*

2. Suggestions can be as simple or as complex as you wish, ranging from a simple title for the range such as “ The men of Dale” to a detailed list of every figure that might be included in the set, with sketches if so desired. **

3. We will open the suggestion page for 2 weeks and keep the poll open for a further 2 weeks. After the winning suggestion has been decided we will publish the complete list of 10 releases.

4. After the range has been announced we will start taking pre-orders for the series. Those members who would be interested in the series can let us know. We will take no payment at this time – we just want collectors to tell us their intent to buy. Anyone can buy this range . It is open to all and not just Fellowship members.

5. If 100 pre-orders have been received at the end of the month we will make the range, put them up on site and advertise them. We will wait a further month for extra orders which would make the range less expensive.

6. We will release the range in 2 parts, the first part as soon as the second month is elapsed and the second part, one month later.

7. Figures will be released in the usual Mithril blister packs

* - There will be some leeway in deciding the contents of the range. While we want to avoid large numbers of double blisters ( cavalrymen and Razaraks!) I will try and be flexible as possible to accommodate essential figures which are a bit more than human sized.

** - members can vote for Helm’s deep 2 ( Death to the Strawheads!) if they so wish but both HD3 and easterlings are too large for this release

Mithril LOTR miniatures: 15% off everything until July 1st.

Mithril Miniatures, the oldest officially licensed manufacturer of metal miniatures based on The Lord of the Rings and The Hobbit books written by J.R.R. Tolkien have a special one week sale now on.

This sale will deduct 15% off EVERYTHING you place in their shopping basket as long as the total value is at least 35 Euro (ex. P&p). Check it out today. http://www.mithril.ie/

This may be a good opportunity to try out Mithril's realistic style of 32mm and 54mm scale collectables.

They have produced 600+ different miniatures over the last 20+ years, including any main character you can concieve of.

And if you DO find that Mithril has missed an important character from those famous books you can join their Fellowship club (now also discounted) and suggest your idea and it may be produced if other members support it.

Mithril's New LOTR Release: The Horn of Helm miniature MS567

The great horn of Helm was housed in one of the towers comprising the great defensive complex of Helm’s Deep. Named in honour of the great Helm Hammerhand, the horn itself was strategically placed so as to echo through the gorge of Aglarond, so as to hugely amplify its sound. It was used both as a warning signal and as a rallying cry, notably during the Battle of Helm’s Deep to signal Theoden’s mounted attack on the forces of Saruman.

The newest Fellowship club miniature was suggested in December 2010. It retails at 24.95 Euro, but duplicates are only 20.95 Euro (available for limited time period). http://www.mithril.ie

Soldering a metal Toy Soldier together with a soldering iron.

Sometimes glue is just not your cup of tea, you want firmer hold, perhaps for more demanding wargaming or for your children to be able to be more aggressive when playing with their castings.
In a previous video I showed how to use a gas tank and welding/soldering torch, but most people will not be able to afford such equipment, so today I show how to use a little soldering iron, easily available from any hardware store. We are using soldering wire with a composite of 63% Tin and 37% Lead.

Follow this link if the video above is not working: http://youtu.be/2Wf3ZmhXuOc

This video covers all the important steps to soldering and all in about a 3 minute video. Key to a good solder project is taking the time to clean the metal of all dirt and greese, otherwise the solder will not adhere properly.

The figure we are demonstrating with is the 54mm scale Napoleonic French Artilleryman (PA80-12). He has a ramrod in his hand used for loading the cannon.
http://www.princeaugust.ie

Mithril Miniatures: New Lord of the Rings figures, Guthlaf and Thorin III

On the 25th of May 2011, Mithril Miniatures released the latest 32mm scale metal LOTR miniatures. These were suggested ideas by members of the Fellowship club in October and November 2010. Chris Tubb designed them with his usual care to attention to detail. Guthlaf (MS565) and Thorin III Stonehelm (MS566) are available to purchase on their Mithril website.

How to Vent your Toy Soldier Rubber Moulds.

Find your mould does not cast exactly as planned? Cannot quite get that sword to come out correctly? Well worry no more, Prince August has put together a comprehensive video on the process of venting, often misunderstood or ignored by hobby casters, for fear of permanently damaging the mould.

It covers predrying the mould, warming the mould, analyzing the problem areas, cutting channels easily and in the CORRECT direction, doing a test cast, application of talcum powder and more. All in 5 minutes.

Just check it out today, try venting a mould and enjoy a whole new experience.

Note: using these tips you can use the cheaper standard metal and get much better results too.

2011 LOTR Easter sale from Mithril Miniatures.

Mithril Miniatures: Happy Easter to all our customers. To celebrate this years special weekend we have reduced by 25% on a massive range of our Fellowship club miniatures, and also the club clothes.
The sale does not cover the newest releases but it still offers any LOTR collector an unparalleled opportunity to catch up on their collection, and fill those pesky gaps.

Here are the quick links:

http://www.mithril.ie/Fellowship/index.html

http://www.mithril.ie/Fellowship/clothes/index.html

Mithril's Entombed Balrog Stirs to wreak havok.

Mithril Miniatures has released September 2010's winning suggestion from the Fellowship Club this April. 'The Entombed Balrog' is one of the larger releases in the exclusive range of collectable figurines based on 'The Hobbit' and 'The Lord of the Rings' books written by J.R.R. Tolkien. This Balrog was suggested by 'Grond' (username of member) and comes in several pieces so assembly is definitely required. It will NOT be primed as it requires assembly and therefore will need to be primed afterwards. It measures 55 mm in height, measured from its base to the top of the wings. For those who also purchased the original Mithril Balrog box set, the new one is much smaller, partly due to its pose but also due to its many thousands of years of slumber depleting its power.

History: The Balrogs or fire demons were the mightiest of the servants of Morgoth. They were his strongest forces in his battle against the Valar in the First-age of Middle-earth, and possessed not only great strength , but intelligence and sorcery also. They were finally destroyed in the great war between the Valar and Morgoth but at least one survived the breaking of Thangorodrim, fleeing to the east and hiding itself in the very roots of the Misty mountains.

Here the Balrog lay undisturbed and entombed for countless centuries until during the Third-age of Middle-earth the Dwarven miners sunk deep shafts into the mountain roots in their quest for Mithril. Here they unwittingly disturbed the crouching form of the somnolent Balrog.